For more than 50 years of supplying high quality fiberglass and polyester resin products, Polymer Products (Phil.), Inc. is proud to introduce its new division which specializes in construction supplies.
At present, our construction materials are Alkaline Resistant Glass (ARG), Fiberglass Mesh, Styro Skin, Polypatch (body filler), Micro Mix (lightweight filler), Plaster of Paris, Polyurethane Foam (liquid & sheets), Inspecta Shield (fire retardant solution), Fiberglass Waterproofing, Carbon Fiber Unidirectional (for retrofitting), and Epoxy Putty.
|
 |
Alkaline Resistant Glass (ARG)
A high quality alkali resistant glass fiber which is specially designed to reinforced concrete and other alkaline matrices. It also contains non-combustibility characteristics, corrosion resistance, and high tensile strength. |
 |
|
Fiberglass Mesh
A woven textile glass widely used in reinforcing wall, plaster board, marble and mosaic, and also exterior insulating finishing system (EIFS) to prevent surface cracking and provide a beautiful finish. It is available at 100m/roll and 50m/roll.
|
 |
|
Styro Skin
Consist of two parts that coats ordinary styropor. The protected styropor will last longer than ordinary unskinned ones. It can also be painted and sanded. Perfect for prototype makers, carvers, and set designers in making props for theater plays, TV shows, festival parade floats, etc.
|
 |
|
Polypatch (body filler)
A superior body filler for repairing and restyling auto bodies, furniture, plaster walls, etc. It also fills and repairs dents, cracks, leaks in metal, wood, fiberglass, concrete, and most plastics. It is easy to apply and it will not rust, rot, or corrode.
|
 |
|
Micro mix (lightweight filler)
A mixture of fine-grained, inorganic powders whose shapes, sizes and materials have been carefully blended to achieve maximum packing efficiency, without increasing the matrix viscosity beyond working limits. It can reduce weight up to 40% than ordinary cement mixtures. It minimizes shrinkage, defects, increases product strength and thermal insulation. It can be screwed similar to wood without cracking. It also reduces resin consumption by 40%.
|
 |
|
Plaster of Paris
Used for ceiling panel, cornices, arches, coves, column covers & sculpture. It gives detailed finishes, high strength and lighter finished product. It is also non-toxic, non combustible, and can be painted or sanded.
|
|
|
Inspecta Shield (fire retardant solution)
A durable, non-toxic, non-allergenic fire retardant chemical coating which is carried in an aqueous (water) solution. Application can be sprayed, soaked, or brushed. It can be applied to a wide variety of items such as carpets, beddings, mattresses, upholsteries, draperies, paper, and lumber. If applied properly, Inspecta-Shield meets or exceeds the criteria for a class (A) rating on most material. It is both odorless and colorless.
|
 |
|
Fiberglass Waterproofing
Can be applied using a brush and can be easily repaired if damaged. It is much cheaper compare to elastomeric waterproofing.
|
 |
|
Unidirectional Carbon Fiber (for retrofitting)
Used for reinforcement bending shear, structures, building structures, pier beams, columns. Available size 50cm x 100cm thick .35mm (by order).
|
 |
|
Epoxy Putty
A superior adhesion used for concrete panels, fiberglass panels, metals, etc.
|
 |
|
Epoxy Primer
A non-solvent Epoxy resin which developed for poor ventilation. It is low-viscosity, solvent free. It is ideal for epoxy flooring primer application for parking area, electric industries, GMP food factories and hospitals.
|
 |
|
Epoxy Infrastructure
A low viscosity multilayer epoxy resin for carbon fiber. It has high strength, excellent flexibility, tensile and compressive strength. It has excellent adhesive on wet surface, superior water resistance, oil resistance, acid and alkali resistance, and solvent resistance.
|
 |
|
RTV FG (Food Grade)
Is not only used for chocolate molding, candy and other FDA food products but can also be used for making precision molds, PU molds, resin molds, gypsum casting and also for making concrete stone molds. It has low shrinkage, high tensile and tear strength.
|
 |
